Frontier© header transports all come with state-of-the-art torsion, flex rear suspension for a much smoother ride. This gives a less bumpy and jarring ride and keeps the heads from bouncing around.
Standard adjustable sliding brackets on the HT11 and HT12 Series Header Transports allow the carrying of most platform and corn heads on the same transport.
Optional draper head support brackets allow the transport to also carry John Deere draper heads.
The first field-installed conversion kit listed below is a tandem suspension rear axle without brakes for the HT1132 Header Transport.
The second field-installed conversion kit listed below is a tandem suspension rear axles with brakes for the HT1232 Header Transport.
The third field-installed conversion kit listed below is for a front braking tricycle axle used on HT1224, HT1228, HT1232, HT1238, and HT1242 Header Transports.
The fourth field-installed conversion kit listed below is for suspension and braked steer axle for the HT1248 Header Transport.
NOTE: In addition to be field conversion kits, the below kits can be ordered using the below codes at the time the header trailers are ordered.
First field conversion kit is for a mounted spare farm implement tire for the HT12 Series Header Transport with serial numbers up to and including XFHT12X900074.
Second field conversion kit is for a mounted spare farm implement tire for the HT11 Series Header Transport with serial numbers up to and including XFHT11X900059.
Third field conversion kit is for a mounted spare farm implement tire for HT11 Series Header
Transports with serial numbers XFHT11X900060 and above, and for HT12 Series Header Transports with serial numbers XFHT12900075 and above.
First field conversion kit listed below is for a clevis hitch with 3/4-inch hitch pin without tongue for the HT11 Series Header Transports.
Second field conversion kit listed below is for a 2-5/16-inch ball hitch without tongue for the HT12 Series Header Transports.
Third field conversion kit listed below is for a 3-inch pintle hitch without tongue for the HT11 and HT12 Series Header Transports.
Fourth field conversion kit listed below is for a telescoping tongue without hitch for the HT11 and HT12 Series Header Transports.
The ratchet straps are a field conversion kit for the HT11 and HT12 Series Header Transports.
The ratchet straps secure the header to the header transport for stable transporting.
Part number 5MM5H000049 listed below is for a front fender for HT11 Series Header Transports.
Part number 5MM5H000099 is for one set of two, single rear fenders for the HT11 Series Header Transports serial numbers up to and including XFHT11X900059.
Part number 5MM5H000149 is for one set of two, single rear fenders for the HT11 Series Header Transports serial numbers XFHT11X900060 and above.
Part number 5MM5H000160 is for draper head support brackets for the HT11 and HT12 Series Header Transports to allow them to carry John Deere draper heads.
Part number 5MM5H000292 is for corn head brackets for the HT11 and HT12 Series Header Transports to accommodate transporting John Deere corn heads with A&I Stalk Stryker© components. It is recommended to also add a top rail extension kit to the HT11 or HT12 Header Transport to ensure compatibility with John Deere corn heads with A&I Stalk Stryker components. *Kit consists of one set of two brackets.
Stalk Stryker is a trademark of A&I Products.