*Inventory shortages may cause extended delivery dates
*This price does not include attachments and accesories
*Inventory shortages may cause extended delivery dates
*This price does not include attachments and accesories
The 2680H High-Performance Disk gives operators the ability to cover acres quickly, increasing their productivity. This two-season tool can operate up to 22.5 km/h (14 mph) in field.
This tool is available in fifteen configurations from 2.4 m to 13.7 m (8 ft to 45 ft). The 2680H requires 34.25 kW/m (14 hp/ft), but in certain hilly, soft, or wet conditions it may require an additional 25 percent engine horsepower to maintain operating speeds at preferred working depth.
Working width | Productivity per hour at 18.5 km/h (11.5 mph)* |
2.5 m (8 ft, 4 in.) | 4.7 ha (11.6 acres) |
3.05 m (10 ft) | 5.6 ha (13.9 acres) |
3.6 m (11 ft, 8 in.) | 6.6 ha (16.3 acres) |
Working width | Productivity per hour at 18.5 km/h (11.5 mph)* |
2.5 m (8 ft, 4 in.) | 4.7 ha (11.6 acres) |
3.05 m (10 ft) | 5.6 ha (13.9 acres) |
3.6 m (11 ft, 8 in.) | 6.6 ha (16.3 acres) |
Working width | Productivity per hour at 18.5 km/h (11.5 mph)* |
4.85 m (15 ft, 11 in.) | 9.0 ha (22.2 acres) |
5.4 m (17 ft, 7 in.) | 9.8 ha (24.3 acres) |
6.4 m (20 ft, 11 in.) | 11.8 ha (29.2 acres) |
7.4 m (24 ft, 4 in.) | 13.7 ha (33.9 acres) |
Working width | Productivity per hour at 18.5 km/h (11.5 mph)* |
7.6 m (25 ft) | 14.1 ha (34.8 acres) |
9.1 m (30 ft) | 16.9 ha (41.8 acres) |
10.7 m (35 ft) | 19.7 ha (48.8 acres) |
12.2 m (40 ft) | 22.6 ha (55.8 acres) |
13.7 m (45 ft) | 25.4 ha (62.7 acres) |
*NOTE: Minimum overlap of 15.2 cm (6 in.).
The 2680H High-Performance Disk features individually mounted blades. These blades, supported by rubber torsion elements, can travel up to 22.9 cm (9 in.) while passing over an obstruction, like a rock. This allows the rest of the tool to remain engaged and continue working, allowing for better ground contour.
To also follow ground contour, wings on the three-section machines flex to stay engaged on hilly or terraced ground.
Blades are also easy to replace. Rather than having to remove an entire gang, just replace an individual blade.
Producers can choose from three rear attachment options to match their operation. Options include a cage roller, spring roller, and rubber roller.
The cage roller is the most versatile option. Choose this rear attachment if the primary application is fall tillage. It works in all soil types and conditions and has a diameter of 64.8 cm (25.5 in.).
The spring roller is the most specialized. It works in light/medium soils and can provide a level seedbed with additional firming. Individually mounted tines work to prevent plugging of the roller. Avoid using it in rocky ground. It has a diameter of 62.2 cm (24.5 in.).
The rubber roller is best for firming and preparing a seedbed in the spring. It works best in lighter drier soils where a firm finish and anchored residue is a primary concern. This rear attachment works in most soil types and features a hydraulically adjustable scraper. It has a diameter of 63.5 cm (25 in.).
Depth control is easy to set on the 2680H High-Performance Disk. The 2680H utilizes a shim system to control depth. Each shim is 1.3-cm (1/2-in.) wide. Simply remove the pin, raise or lower the number of shims needed to reach the desired depth, and replace the pin.
The 2680H also features greaseless bushings and bearings, allowing operators to get into the field faster without extensive daily maintenance.
With short windows of time to perform tillage operations, TruSet provides significant productivity improvements as operators can adjust the tool with just the push of a button, maximizing acres covered per day. By responding to conditions as they change throughout the field, TruSet Active enables operators to generate a higher-quality tillage performance within the first pass.
Using a GreenStar© display, an operator sees real-time data for a variety of feature settings, ensuring confidence in desired tillage outcomes. Four customizable presets enable operators to save and name different combinations of settings for their most common field conditions, which allows for even quicker implement adjustments.
Single-point depth control is included with the TruSet Tillage system, giving operators the choice of automated or manual adjustments. Hydraulic routings on the tool are designed to allow each implement to feature both TruSet and standard single-point depth control for system redundancy, operator preference, and flexibility at resale.
John Deere has expanded TruSet features to bring even more functionality into the cab:
TruSet Tillage features a variety of technology features and packages. With either the Select or Premium package, you can elevate your experience with some or full control of your tillage tool from the cab at your fingertips. The following table outlines each TruSet offering specific to the implement model. For additional information on each feature, see the details after the table.
TruSet offerings | ||||||||
Control of: | Set-point depth | Active depth | Basket pressure | Side-to-side leveling | Gang angle | Fore-aft | Wing down pressure | Stabilizer wheels |
2230 Floating Hitch Field Cultivator | --- | Select** | Select | Premium | --- | --- | --- | --- |
2230 Level-Lift© Field Cultivator | --- | Select** | Select | --- | --- | --- | --- | --- |
2330 Mulch Finisher | --- | Select** | Select | Premium** | --- | Premium** | --- | --- |
2630 Series Disks | --- | Select** | Select | Premium | --- | Premium** | --- | Option |
2633VT Vertical Tillage | --- | Select** | Select | Premium | --- | Premium** | --- | --- |
2660VT Vertical Tillage | --- | Select** | Select | Premium | Premium | Premium | Premium | Option |
2680H High-Speed Disk* | In base | --- | --- | --- | --- | --- | --- | --- |
*Currently not available in feature packaging
**New feature
NOTE: All Select package features are also included in the Premium package.
Active depth (Select and Premium package)
Basket pressure and raise (Select and Premium package)
Side-to-side leveling (Premium package)
Gang angle (Premium package)
Fore-aft (Premium package)
Wing down pressure (Premium package)
NOTE: TruSet hydraulic wing control pressure is only offered on three-section models.
Stabilizer wheels (additional factory option)
NOTE: Stabilizer wheels are not offered on one-section models.
With integrated TruSet Tillage technology, operators can incorporate documentation and prescription functionality into their tillage operations. The tillage documentation feature allows producers to capture and analyze the tillage pass for additional coverage of the crop production cycle. Prescription functionality provides producers the capability to ensure their tillage operations are executed correctly, optimizing their investment in preparing for the next crop.
Operators can document data for the depth of their tillage tool along with rolling basket down pressure. By creating an as-applied map based off global positioning system (GPS) data for the job performed by each functional area on the implement, TruSet enables producers to document their tillage passes then later review and analyze the data for future agronomic decisions.
Additionally, the Prescription Creator by Agrian® company, a connected partner tool through the John Deere Operations Center, enables producers to create prescriptions for each functional area on the tillage tools. Data from previous yields, soil surveys, or freehand drawing tools can be used to create prescriptions that command the implement to the desired depth and pressure settings for optimum agronomic results.
Agrian is a trademark of Agrian, Inc.
Machine | |
Working width | 3.56 m 11.67 ft |
Transport width | 3.83 m 12.58 ft |
Transport height | 3.07 m 10.08 ft |
Working depth | 5.1 to 15.2 cm 2 to 6 in. |
Blade spacing | 25.4 cm 10 in. |
Horsepower per ft (PTO) | 10.4 kW or more 14 hp or more |
Operating speed | 16.1 to 22.5 km/h 10 to 14 mph |
Purpose | Primary/Secondary |
Weight per blade | 137 kg 302 lb |
Blade size | 50.8 cm 20 in. |
Number of blades | |
Front blades | 14 |
Rear blades | 14 |
Total | 28 |
Machine | |
Horsepower per ft | 10.4 kW or more 14 hp or more |