Rome Equipment DTR-539

For use with tractors in the 450 - 600hp range

• The abrasive resistant alloy steel shanks, flame cut to a parabolic curve, will shatter the toughest hardpan to a depth of 39 (610 mm).

• Shanks set at 32 (813 mm) spacing with shear bolt protection.

• T1 wear strips and armor cover the entire shank and are easily replaceable.

• Fabricated hard-surfaced points are standard.Designed for maximum clearance and weight transfer to drawbar of tractor.

• The hitch, mainframe and shank holding plates are well braced and designed to alleviate lateral and torsional stress and are all low hydrogen welded.

• Center “V” frame is all welded box type construction made of 6” (152mm) x 8” (203mm) x 3/8” (10mm) rectangular tubing with 1/2” (13mm) x 6” (152mm) fishplates.

• Parabolic curved shanks are 1-3/4” (45mm) x 11” (279mm) x 42” (1.1m) 360 Brinell alloy steel with splitters and replaceable fabricated hard-surfaced points.

• Bolt on hard surfaced fabricated points for shanks.

• Shear bolts are 1-1/4” (32mm) x 6” (152mm) grade 5.

• Two – 22.5 Super Single tires.

• Hydraulic control group includes one 5” (127mm) x 12” (305mm) drawbar cylinder, two 5” (127mm) x 20” (508mm) transport cylinders, hoses, and quick couplers to reach the rear of

• the tractor.

• Cylinder lock assemblies for each cylinder rod keeps cylinder from retracting if pressure is lost while transporting.

• Depth gauge rod provides leveling (frame) adjustment.